LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 635 (Anti-Lock Brake System -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Speed Sensor Ring - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front brake disc. For additional information, refer to FRONT DISC BRAKE .
  2. Use the special tools to remove the front wheel speed sensor ring.
    CAUTION: Install a new front wheel speed sensor ring.
    CAUTION: The front wheel speed sensor ring must be pressed on straight.
  3. To install, reverse the removal procedure.
    4. Fig 1: Removing Front Wheel Speed Sensor Ring Using Special Tools
    G04644578Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals