Clutch Pressure Plate Locating Dowels: Removal
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- When installed in an open hole, use a drift to remove the dowel. When installed in a blind hole, use locking pliers to remove the dowel.
- There are 2 dowels on the diesel engine flywheel and 3 dowels on the gasoline engine flywheel.
CAUTION:
Do not damage the bore or the surrounding surface area.