Torque Converter Operation Test
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
This test verifies that the torque converter clutch control system and the torque converter are operating correctly.
- Carry out Quick Test, refer to ON-BOARD DIAGNOSTICS WITH SCAN TOOL . Check for DTCs. Refer to the DIAGNOSTIC TROUBLE CODE CHART .
- Connect a tachometer to the engine.
- Bring the engine to normal operating temperature by driving the vehicle at highway speeds for approximately 15 minutes in (D) position.
- After normal operating temperature is reached, maintain a constant vehicle speed of about 80 km/h (50 mph) and tap brake pedal with the left foot.
- Engine RPM should increase when brake pedal is tapped and decrease about 5 seconds after pedal is released. If this does not occur, refer to DIAGNOSIS BY SYMPTOM .