Valve and Seat Refacing Measurements

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: After grinding valves or valve seats, check valve clearance.

Check the valve head and seat.
- Check valve angles.
- Check margin width.
- Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.
- Be sure margin width is within specification.
  
  Fig 1: Identifying Valve Margin Width
  Courtesy of FORD MOTOR CO.
Inspect for abnormalities on the valve face and seat.