LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 613 (Engine System-General Information - F250-F550 Super Duty (Gasoline)) >> General Procedures >> Cylinder Bore Cleaning

Cylinder Bore Cleaning

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12) or equivalent WSS-M2C930-A
    CAUTION: If these procedures are not followed, rusting of the cylinder bores may occur.
  1. Clean the cylinder bores with soap or detergent and water.
  2. Thoroughly rinse with clean water and wipe dry with a clean, lint-free cloth.
  3. Use a clean, lint-free cloth and lubricate the cylinder bores.
    • Use clean engine oil meeting Ford specification.
scientia non olet · About LEMON Manuals