LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (HVAC Control System - F250-F550 Super Duty) >> Removal And Installation >> Automatic Temperature Control Solenoid and Manifold >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio unit. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEM .
  2. Disconnect the automatic temperature control (ATC) solenoid and manifold.
    1. Disconnect the vacuum connector.
    2. Disconnect the electrical connector.
      Fig 1: Locating Automatic Temperature Control (ATC) Solenoid And Manifold
      G04645124Courtesy of FORD MOTOR CO.
  3. Remove the screw and remove the ATC solenoid and manifold.
    Fig 2: Locating ATC Solenoid And Manifold
    G04645125Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.