Fuel Tank Shutoff Solenoid Valve: Installation
WARNING: This page is about a different car, the 2000 Ford Pickup, 2000 Ford Econoline, and 2000 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.
Replace "O" rings. Lubricate "O" rings with clean 5W-30 engine oil. Ensure threads on valve and tank are clean and in good condition. Install components by hand. Inspect threads if resistance is felt during installation. Ensure fuel lines are aligned before tightening. DO NOT cross-thread fittings. Tighten fittings to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.