Removal & Installation (Econoline)

WARNING: This page is about a different car, the 2000 Ford Pickup, 2000 Ford Econoline, and 2000 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Fuel pressure regulator and coalescer/fuel filter are removed as an assembly.

Release fuel pressure. See FUEL SYSTEM VENTING . Pinch off coolant hoses approximately 3" from fuel pressure regulator. Disconnect low pressure fuel line from fuel pressure regulator.
Disconnect high pressure fuel line from coalescer/fuel filter. Loosen fitting retaining regulator to coalescer/fuel filter. Remove mounting bracket bolts. Remove regulator assembly. To install, replace natural gas approved "O" rings.