Passenger Window Power Supply
The REM controls the power supply to all three remote window regulator control switches. To protect the REM from a potential failure, the REM will remove power from the common passenger window power supply when a short to ground is sensed in any remote window regulator control switch, associated circuitry or the power output circuit of the REM. Power will be restored to the power output circuit upon a cycling of the ignition switch. If the REM output circuit is shorted to ground, the REM will immediately remove power from the common power supply circuit. If any remote window regulator control switch or its associated circuits are shorted to ground, the power will remain on the REM output circuit until the switch or circuit containing the short to ground is activated.