Passenger Front Power Window

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

The passenger front power window is controlled by the FEM. The passenger front window regulator control switch is hardwired directly to the FEM. Activating the passenger front window regulator control switch sends a voltage input to the FEM. The FEM then controls power and ground to the passenger front power window regulator electric drive, which is directly hardwired to the FEM. The voltage signal will only be received if the REM is supplying voltage to the remote window regulator control switch circuit.

The passenger front window can also be controlled by the master window regulator control switch. Activating the passenger front switch on the master window regulator control switch sends a voltage input to the DDM. The DDM will then send a message to the FEM over the network. The FEM then controls power and ground to the passenger front window regulator electric drive.