Removal and Installation

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear seat cushions. For additional information, see SEAT - REAR CUSHION .

Fig 1: Removing Rear Seat Cushions
Courtesy of FORD MOTOR CO.
From the luggage compartment, release and fold down the seat backrest.
Remove the rear seat bolster nut.

Fig 2: Removing Rear Seat Bolster Nut
Courtesy of FORD MOTOR CO.

NOTE: Pull down the lever to release the LH latch. Push up the lever to release the RH latch.

Fig 3: Releasing Latch

Courtesy of FORD MOTOR CO.

Release the latch and remove the rear seat bolster.
To install, reverse the removal procedure.