LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Seating) >> Removal And Installation >> Heated Seat Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Apply the parking brake.

    Vehicles with manual transmission 

  2. If equipped with a manual transmission, place the selector lever in fourth gear.

    Vehicles with automatic transmission 

  3. If equipped with an automatic transmission, place the selector lever in NEUTRAL.

    All vehicles 

  4. Disconnect the battery ground cable.
  5. Remove the ashtray finish panel.
    Fig 1: Removing Ashtray Finish Panel
    G02165760Courtesy of FORD MOTOR CO.
  6. Remove the two screws and the ashtray assembly.
    • Disconnect the electrical connectors.
  7. Release the locking tabs and remove the heated seat switch.
  8. To install, reverse the removal procedure.