LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Fuel System >> Quick-Disconnect Fittings >> Push Connect Coupling

Push Connect Coupling

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect safety clip from male hose. See Fig 1. Install Fuel Line Disconnect (T90T-9550-S) and push it into fitting. Separate fittings.
  2. Before installation, lubricate tube end with clean engine oil. Align tube to fitting and push until a click is heard. Pull on fitting to ensure engagement. Install safety clip.
Fig 1: Disconnecting Fuel Lines With Push Connect Coupling
G99E02483Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals