LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 455 (Body Panel System - Front End Body Panels) >> Removal And Installation >> Cowl Panel Grille >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper pivot arms. For additional information, refer to WIPERS AND WASHERS .
  2. Remove the cowl panel grille weather seal.
  3. Remove the 6 cowl panel grille screws.
  4. Remove the 2 cowl panel grille pin-type retainers.
  5. Remove the 5 cowl panel grille retainer clips.
  6. Position the cowl panel grille aside and disconnect the washer hose union.
  7. Remove the cowl panel grille.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals