Anti-Lock Control-Traction Control and Stability Assist
WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
The four wheel anti-lock brake system (4WABS) with traction control and stability assist system consists of the following components:
- Active brake booster with integral solenoid
- Brake booster release switch
- Front anti-lock brake sensors
- Front anti-lock brake sensor indicators
- Hydraulic control unit (HCU)
- Stability assist event indicator
- Stability assist module
- Lateral accelerometer
- Rear anti-lock brake sensors
- Rear anti-lock brake sensor indicators
- Steering wheel position sensor
- Two brake pressure transducers
- Advance Trac control switch
- Yaw rate sensor
- Yellow anti-lock brake warning indicator
For removal and installation of the brake booster release switch, see POWER BRAKE ACTUATION - LS .
For removal and installation of the front anti-lock brake sensor indicators, WHEEL BEARING AND HUB .
For removal and installation of the rear anti-lock brake sensor indicator, see AXLE SHAFTS .
For removal and installation of the steering wheel position sensor, see STEERING COLUMN - LS .