DTC P0A23: Generator Torque Sensor Circuit Range/Performance
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A23 - GENERATOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description: | The PCM checks the amount of the generator motor torque delivered, by monitoring the frequency of the torque of generator AC (TGAC) signal. This DTC indicates that the TGAC signal is out of expected range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Read the PCM GTQ_CMD PID. The PID value should be 0 Nm (0 lb ft) in PARK or NEUTRAL if the brake pedal is not applied. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test TC . | ||