DTC P0107: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0107 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR LOW
| Description: | Sensor operating voltage is less than 0.25 volt (VREF). As a result it failed below the minimum allowable calibrated parameter. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | VREF should be greater than 4.0 volts. The PID reading is in frequency/volts. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DM . | ||