DTC P0106: Manifold Absolute Pressure (Map/BARO) Sensor Range/Performance
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP/BARO) SENSOR RANGE/PERFORMANCE
| Description: | MAP sensor input to the powertrain control module (PCM) is monitored and is not within the calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | VREF voltage should be between 4.0 and 6.0 volts. The PID reading is in frequency. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DM . | ||