LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Front Suspension - 2WD - Excursion, F-250 & F-350 Super Duty) >> Adjustments & Inspection >> Ride Height

Ride Height

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Ford Pickup, 2004 Ford Excursion, 2003 Ford Pickup, 2003 Ford Excursion, and 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Drive vehicle onto runway lift. Jounce vehicle to normalize front and rear suspension static ride height. Measure from top of axle directly under frame, to bottom of frame where jounce bumper mounts. See Fig 1. For specifications see RIDE HEIGHT SPECIFICATIONS  table.

Fig 1: Measuring Ride Height
G00324338Courtesy of FORD MOTOR CO.
RIDE HEIGHT SPECIFICATIONS

Application In. (mm)
Excursion
Right side 4.2 (106)
Left side 4.7 (118)
F250 Pickup 4.3-4.9 (110-124)
F350 Pick-Up, Single Rear Wheel 4.3-4.9 (110-124)
F350 Pick-Up, Dual Rear Wheel 4.3-4.9 (110-124)
F350 Chassis Cab, Single Rear Wheel 4.3-4.9 (110-124)
F350 Chassis Cab, Dual Rear Wheel 4.3-4.9 (110-124)