Interior Power Lock/Unlock
The power lock/unlock function is independent of the ignition switch position. Power lock of all doors is accomplished by:
- the driver or passenger door lock control switch
- a lock command from the remote keyless entry (RKE) transmitter
- a lock command from the driver set/reset switch (part of the door latch)
- the RKE keypad
If the perimeter alarm is armed, the interior luggage compartment lid release and door lock control switches are disabled. Disarming the alarm (through valid unlock commands) enables them.
When the LOCK button on the RKE transmitter is pressed once, the power lock function initiates the locking of all doors. If pressed twice and all doors, luggage compartment lid, and hood are closed, then the horn chirps once (if horn chirp is enabled). If pressed twice and any door, luggage compartment lid or hood is open/ajar then the horn chirps twice (if horn chirp is enabled). If 2-stage unlocking is enabled, the driver door unlocks on the first occurrence of one of the following events with no other identical UNLOCK events in the past 5 seconds:
- a command from the RKE transmitter
- a command from the driver set/reset switch (part of the door latch)
- a command from the RKE keypad
When 2-stage unlocking is enabled, if a subsequent unlock event of the same type occurs within 5 seconds without the doors being relocked, all the doors unlock. When 2-stage unlock is disabled, all doors unlock at the first (and all subsequent) unlock commands.