LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Front End Body Panels) >> Removal And Installation >> Fender Splash Shield >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 pin-type retainers and the front fender front splash shield.
  2. Remove the front fender rear splash shield screw.
  3. Remove the 3 pin-type retainers and the front fender rear splash shield.
  4. To install, reverse the removal procedure.