LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 340 (Warning Devices) >> General Procedures >> Safety Belt Minder Deactivating/Activating >> Preparation

Safety Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake before deactivating/activating the safety belt minder.
  2. Place the gear selector lever in PARK or NEUTRAL (manual transmission).
  3. Place the ignition lock cylinder in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver and the front passenger safety belts.
scientia non olet · About LEMON Manuals