Side Air Bag Module: Installation
WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Position side air bag module into deployment chute with alignment pin offset to top and electrical connector to bottom of seat back. Ensure side air bag module mounting studs have come through deployment chute stud openings. Position side air bag module on seat back frame and install mounting nuts. Tighten side air bag module mounting nuts to specification. See TORQUE SPECIFICATIONS .
- To complete installation, reverse removal procedure. Ensure side air bag module harness is correctly routed. Tighten fasteners to specification. Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.