LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Air Bag Restraint Systems) >> Disabling & Activating Air Bag System >> Activating System >> Diagnostics Activation Procedure (Seats Removed)

Diagnostics Activation Procedure (Seats Removed)

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Remove air bag simulators from left and right front seat belt pretensioner harness connectors and reconnect connectors. Install left and right B-pillar trim panels and weatherstripping. Install left and right door scuff plates.
  2. Install front seats. Remove air bag simulators from left and right side air bag module harness connector and reconnect connectors. Remove air bag simulator from passenger-side air bag module harness connector and reconnect connector.
  3. Remove air bag simulator from upper clockspring connector and install driver-side air bag module. Reconnect negative battery cable. Perform system operation check. See SYSTEM OPERATION CHECK  . Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals