Combination Fluid Cooler: Removal

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Remove the A/C condenser core. For additional information, refer to AIR CONDITIONING .
Remove and discard the six hose clamps.

Fig 1: Locating Cooler Hose Clamps
Courtesy of FORD MOTOR CO.

NOTE: Position a drain pan under the vehicle to catch any fluid that may spill.

Disconnect the six hoses from the cooler. Plug the hoses and the cooler.
Remove the cooler.
1. Remove the two bolts.
2. Lift the cooler from the retainers and remove the cooler.
Fig 2: Removing Bolts And Cooler
Courtesy of FORD MOTOR CO.