LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Intake Air Temperature Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Disconnect Intake Air Temperature (IAT) sensor harness connector and remove IAT sensor. Inspect IAT sensor "O" ring seal for damage or deterioration. Replace "O" ring seal as necessary. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals