Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Lubricate the crankshaft front oil seal and the engine front cover mating surface with clean engine oil.

Fig 1: Installing Crankshaft Front Seal

Courtesy of FORD MOTOR CO.

Using the special tool, install a new crankshaft front seal.
Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY in this article.
Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .