LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY  in this article .
    2. CAUTION: Use care not to scratch the crankshaft surface while removing the seal.
  2. Using the special tool, remove the crankshaft front seal.
Fig 1: Removing Crankshaft Front Seal
G03995770Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals