LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Power Steering) >> Removal And Installation >> Power Steering Fluid Cooler >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components can result.
  1. Remove the air conditioning condenser. For additional information, refer to AIR DISTRIBUTION & FILTERING .
  2. Remove and discard the 4 hose clamps.
  3. Remove the steering gear-to-cooler hose.
    • Allow the fluid to drain into a suitable container.
  4. Remove the cooler-to-reservoir return hose.
  5. Remove the lower transmission cooler line.
    • Allow the fluid to drain into a suitable container.
  6. Remove the upper transmission cooler line.
  7. Remove the 2 bolts and the power steering fluid cooler.
scientia non olet · About LEMON Manuals