LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (Hydraulic Brake Actuation) >> Removal And Installation >> Brake Pedal Motor Cable >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column. For additional information, refer to STEERING COLUMN .
  2. Disconnect the drive cable assemblies from the brake pedal transmission.
  3. Release the cable assembly from the adjustable pedal motor.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals