Oil Cooler Steel Lines (THUNDERBIRD): Installation
WARNING: This page is about a different car, the 2002 Lincoln LS and 2002 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
- Position the steel fluid cooling tubes in the vehicle and install the fluid cooling tube support bracket on the tubes. Install the right engine mount. Install the steel fluid cooling tube support bracket.
- Install the wire harness connector. Connect the steel fluid cooling tubes to the transmission. Install the generator. Install the right side splash shield with 2 screws and one pushpin.
- Install the steel fluid cooling tube routing bracket. Connect the steel fluid cooling tubes to the rubber fluid cooling hoses. Connect the battery.