LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Servicing - A/T) >> Removal & Installation >> Oil Cooler Hoses (THUNDERBIRD) >> Removal

Oil Cooler Hoses (THUNDERBIRD): Removal

WARNING: This page is about a different car, the 2002 Lincoln LS and 2002 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.

Remove the A/C condenser core. See appropriate AUTOMATIC A/C-HEATER SYSTEMS article. Disconnect the rubber fluid cooler hoses from the fluid cooler. See Fig 1 . Cut and discard the clamps. Disconnect the rubber fluid cooling hoses from the steel fluid cooling tubes. Remove the rubber fluid cooling hoses.

Fig 1: Removing Oil Cooler Hoses At Oil Cooler (Thunderbird)
G00117618Courtesy of FORD MOTOR CO.