LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 283 (Bumper System) >> Removal And Installation >> Bumper Bracket - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper. For additional information, refer to REAR BUMPER .
  2. Remove the rear bumper bracket bolts.
    • To install, tighten to 47 Nm (35 lb-ft).
  3. Remove the rear bumper bracket.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals