Removal and Installation
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- With the seat in the E-Z entry position, release the cushion trim cover J-clip under the seat.
- From under the seat and at the back, between the cushion foam pad and frame, release the J-clip attached to the seat cushion frame.
- Pull the cushion trim cover retainers out from between the riser/seat track and the cushion frame.
- Remove the hog rings and the cushion trim cover from the cushion foam pad.
- To install, reverse the removal procedure.