LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine - 4.6L V8 - VIN W & 6) >> Removal & Installation >> Oil Cooler >> Installation

Oil Cooler: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Ford Pickup, 2001 Ford Expedition, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil cooler insert.
    Fig 1: Removing/Installing Oil Cooler Insert
    G00531737Courtesy of FORD MOTOR CO.
  2. Install the oil bypass filter.
    Fig 2: Removing/Installing Oil Bypass Filter
    G00531736Courtesy of FORD MOTOR CO.
  3. Install the drain plug.
    Fig 3: Installing Drain Plug
    G02186560Courtesy of FORD MOTOR CO.
  4. Lower the vehicle.
  5. Fill the engine with clean engine oil.
  6. Fill the engine coolant.
scientia non olet · About LEMON Manuals