LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine) >> In-Vehicle Repair >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY .
    2. CAUTION: Do not scratch or damage the sealing surfaces when using the special tool to remove the crankshaft front oil seal.
    Fig 1: Removing Crankshaft Front Oil Seal
    G03990106Courtesy of FORD MOTOR CO.
  2. Using the special tool, remove the crankshaft front oil seal and discard.
scientia non olet · About LEMON Manuals