Removal & Installation (3.8L)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2001 Mercury Sable, 2001 Mercury Grand Marquis, 2001 Mercury Cougar, 2001 Lincoln Town Car, and 2001 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

CMP sensor is located on top of camshaft synchronizer assembly. Disconnect negative battery cable. Disconnect CMP sensor harness connector. Remove CMP sensor mounting bolts and CMP sensor.
To install, reverse removal procedure. Tighten CMP sensor bolts to specification. See TORQUE SPECIFICATIONS . If camshaft synchronizer removal and installation is necessary, see CAMSHAFT SYNCHRONIZER .