Removal & Installation (2.0L DOHC VIN 3)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2001 Mercury Sable, 2001 Mercury Grand Marquis, 2001 Mercury Cougar, 2001 Lincoln Town Car, and 2001 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
CMP sensor is located on rear of cylinder head above exhaust manifold. Disconnect negative battery cable. Remove air cleaner outlet tube and breather pipe. Disconnect wiring from CMP sensor. Remove sensor retaining bolt and remove sensor. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .