LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - Removal & Installation & Overhaul) >> Fuel System >> Upper Intake Manifold >> Removal (Mustang 3.8L)

Removal (Mustang 3.8L)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2001 Mercury Sable, 2001 Mercury Grand Marquis, 2001 Mercury Cougar, 2001 Lincoln Town Car, and 2001 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air cleaner outlet tube. Disconnect electrical connector at IAC solenoid and vacuum hose located near IAC connector. Disconnect TP sensor electrical connector, evaporative emissions return tube and vacuum hoses from upper intake manifold. Disconnect accelerator and speed control cables from throttle body.
  2. Remove accelerator cable from accelerator bracket. Remove solenoid bracket bolts and position bracket aside. Disconnect PCV hose. Remove 4 bolts retaining ignition coil pack and position aside. Remove upper intake manifold bolts and discard upper intake manifold gasket.