Removal (Mustang 4.6L VIN X)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2001 Mercury Sable, 2001 Mercury Grand Marquis, 2001 Mercury Cougar, 2001 Lincoln Town Car, and 2001 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition switch is turned to OFF position. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect fuel supply line. See FUEL LINE CONNECTOR . Disconnect negative battery cable.
- Remove throttle body. Remove IAC hose and position aside. Remove PCV hose. Disconnect 4 right side fuel injector connectors. Disconnect IAC electrical connector and main chassis vacuum hose. Squeeze 2 locking tabs, and remove accelerator cable and speed control cable (if equipped) and position aside. Disconnect fuel pressure sensor electrical connector and vacuum hose. Disconnect ground wire and 4 left side fuel injector connectors.
- Remove Exhaust Vacuum Regulator (EVR) solenoid vacuum lines. Remove bolts from EGR pressure transducer bracket and position aside. Remove EGR to exhaust manifold tube. Disconnect EGR vacuum hose. Remove 4 fuel injection supply manifold bolts. Remove fuel injection supply manifold and injectors as a unit. Remove fuel injectors and discard "O" rings.