LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - Removal & Installation & Overhaul) >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2001 Mercury Sable, 2001 Mercury Grand Marquis, 2001 Mercury Cougar, 2001 Lincoln Town Car, and 2001 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove any component necessary to gain access to PCM. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

POWERTRAIN CONTROL MODULE LOCATION

Application Location
Cougar, LS, Sable & Taurus Right Rear Of Engine Compartment, Mounted On Cowl
Continental Right Rear Of Engine Compartment, Under Cowl Cover
Crown Victoria, Grand Marquis & Town Car Behind Master Cylinder
Escort Center Of Instrument Panel, Below Center Console
Focus & Mustang Behind Right Kick Panel