LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Track - Captain's Chair and 40 Percent >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat. For additional information, refer to FRONT SEAT - CAPTAIN'S CHAIR AND 40 PERCENT  in this article.
  2. Remove the safety belt buckle nut and disconnect the usage detection switch electrical connector, and remove safety belt buckle.
  3. Remove the bolts.
    Fig 1: Removing Bolts - With Torque Specifications
    G03911460Courtesy of FORD MOTOR CO.
  4. Disconnect the electrical connector.
    Fig 2: Disconnecting Electrical Connector
    G03911461Courtesy of FORD MOTOR CO.
  5. Remove the electrical harness pin-type retainer.
    Fig 3: Removing Electrical Harness Pin-Type Retainer
    G03911462Courtesy of FORD MOTOR CO.
  6. Disconnect the seat motor electrical connector.
    Fig 4: Disconnecting Seat Motor Electrical Connector
    G03911463Courtesy of FORD MOTOR CO.
  7. Remove the seat track.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals