Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear seat. For additional information, refer to REAR SEAT - BENCH, CREW CAB in this article.
Separate the seat cover J-clip.

Fig 1: Separating Seat Cover J-Clip
Courtesy of FORD MOTOR CO.
Pull the seat covering to access the seat back retaining bolts.

Fig 2: Pulling Seat Covering To Access Seat Back Retaining Bolts
Courtesy of FORD MOTOR CO.
Remove the seat back bolts.

Fig 3: Removing Seat Back Bolts - With Torque Specifications
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.