LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Front Seat - 20 Percent >> Removal

Front Seat - 20 Percent: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: New retaining bolts (W710721) must be installed, do not reuse the bolts that were removed.
  1. Remove the front seats. For additional information, refer to FRONT SEAT - WITH SEAT INTEGRATED RESTRAINTS (SIR)  or FRONT SEAT - CAPTAIN'S CHAIR AND 40 PERCENT  in this article.
  2. Remove and discard the center seat mounting retaining bolt from right side rear mounting bracket.
    Fig 1: Removing Center Seat Mounting Retaining Bolt
    G03911403Courtesy of FORD MOTOR CO.
  3. Remove the center seat retaining nut from left side rear mounting bracket.
    Fig 2: Removing Center Seat Retaining Nut
    G03911404Courtesy of FORD MOTOR CO.
  4. Remove the seat.