LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Front Seat - 20 Percent >> Installation

Front Seat - 20 Percent: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat.
  2. Position the safety belt anchor. Install the center seat LH rear retaining nut.
    • Make sure the safety belt is not twisted prior to installation.
      Fig 1: Installing Center Seat LH Rear Retaining Nut - With Torque Specifications
      G03911405Courtesy of FORD MOTOR CO.
  3. Install the new center seat RH rear mounting retaining bolt.
    Fig 2: Installing Center Seat RH Rear Mounting Retaining Bolt - With Torque Specifications
    G03911406Courtesy of FORD MOTOR CO.
  4. Install the front seats. For additional information, refer to FRONT SEAT - WITH SEAT INTEGRATED RESTRAINTS (SIR)  or FRONT SEAT - CAPTAIN'S CHAIR AND 40 PERCENT  in this article.