Disassembly and Assembly

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear bench seat backrest. For additional information, refer Rear Seat Backrest - Bench, Crew Cab to in this article.
Remove the two armrest bracket bolts, if so equipped, to remove the armrest from the back assembly.

Fig 1: Removing Armrest Bracket Bolts - With Torque Specifications
Courtesy of FORD MOTOR CO.
Remove the rubber insert.

Fig 2: Removing Rubber Insert
Courtesy of FORD MOTOR CO.
Remove the screws and cupholder.

Fig 3: Removing Screws And Cupholder
Courtesy of FORD MOTOR CO.
Unzip the armrest cover and remove from the armrest.

Fig 4: Removing Armrest
Courtesy of FORD MOTOR CO.
Unfasten the seat back cover J-clips and remove the cover.

Fig 5: Removing Cover
Courtesy of FORD MOTOR CO.
Remove the seat back cushion foam pad from the seat back frame.

Fig 6: Removing Seat Back Cushion Foam Pad From Seat Back Frame
Courtesy of FORD MOTOR CO.
Remove the four armrest bolts and remove armrest brackets.

Fig 7: Removing Four Armrest Bolts - With Torque Specifications
Courtesy of FORD MOTOR CO.
To assemble, reverse the disassembly procedure.