LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Front Seat Cushion - Bench >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bench seat backrest. For additional information, refer to FRONT SEAT BACKREST - BENCH  in this article.
  2. Remove the safety belt buckles from the cushion trim retainer (one side shown).
    Fig 1: Removing Safety Belt Buckles From Cushion Trim Retainer
    G03925583Courtesy of FORD MOTOR CO.
  3. Remove the two LH seat riser nuts and remove the seat riser.
    Fig 2: Removing LH Seat Riser Nuts And Seat Riser - With Torque Specifications
    G03925584Courtesy of FORD MOTOR CO.
  4. Remove the two RH seat riser nuts and remove the seat riser.
    Fig 3: Removing RH Seat Riser Nuts - With Torque Specifications
    G03925585Courtesy of FORD MOTOR CO.
  5. Remove two seat track-to-cushion front bolts (one shown).
    Fig 4: Removing Seat Track-To-Cushion Front Bolts - With Torque Specifications
    G03925586Courtesy of FORD MOTOR CO.
  6. Remove two seat track-to-cushion rear bolts (one shown) and remove the seat track assembly.
    Fig 5: Removing Seat Track-To-Cushion Rear Bolts - With Torque Specifications
    G03925587Courtesy of FORD MOTOR CO.
  7. Remove the two LH seat track adjusting bar bolts.
    Fig 6: Removing LH Seat Track Adjusting Bar Bolts - With Torque Specifications
    G03925588Courtesy of FORD MOTOR CO.
  8. Remove the RH seat track adjusting bar bolt.
    Fig 7: Removing RH Seat Track Adjusting Bar Bolt - With Torque Specifications
    G03925589Courtesy of FORD MOTOR CO.
  9. Release the seat cushion J-clips.
    Fig 8: Releasing Seat Cushion J-Clips
    G03925590Courtesy of FORD MOTOR CO.
    10. NOTE: Note the position of the recliner cable for installation.
    Fig 9: Removing Recliner Cable
    G03925591Courtesy of FORD MOTOR CO.
  10. Release the recliner cable anchor clips and remove the recliner cable.
  11. Remove the seat cushion frame from the seat cushion and trim cover assembly.
    Fig 10: Removing Seat Cushion Frame
    G03925592Courtesy of FORD MOTOR CO.
    12. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat cushion foam.
    Fig 11: Removing Seat Cushion Trim Cover From Foam Pad
    G03925593Courtesy of FORD MOTOR CO.
  12. Invert the cushion trim cover and release the hook-and-loop strips and remove the seat cushion trim cover from the foam pad.
  13. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals