Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Lower the glove compartment.
Remove the parking aid module.
1. Remove the pin-type retainers.
2. Disconnect the electrical connectors.
3. Remove the parking aid module.
  
  Fig 1: Removing Parking Aid Module
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.