PINPOINT TEST TA: Clutch Pedal Position (CPP) Switch: Introduction

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

CPP switch (11A152/7C534)
harness circuits: CPP-BT and SIGRTN/GND
powertrain control module (PCM) (12A650)

Fig 1: Identifying Clutch Pedal Position (CPP) Switch Connector
Courtesy of FORD MOTOR CO.

Powertrain Control Module (PCM) Connector

For PCM connector views or reference values, refer to REFERENCE VALUES .

POWERTRAIN CONTROL MODULE (PCM) CONNECTOR PINS REFERENCE CHART

Vehicle	Connector	Pin	Circuit
Escape / Mariner	190-PIN	B56, E49, T41 T27	SIGRTN CPP-BT
Fiesta	128 PIN	E3 B7	SIGRTN CPP-BT
Focus, Transit Connect	190-PIN	B58, E64, T40 T26	SIGRTN CPP-BT
Fusion, Milan, Mustang 3.7L	190-PIN	B56, E49, T41 T26	SIGRTN CPP-BT
Ranger	170 PIN	B41, E58, T41 B33	SIGRTN CPP-BT
All other vehicles	190-PIN	B56, E32, T38 T19	SIGRTN CPP-BT