LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1815 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0600 Through DTC P164A - (Except Diesel & Hybrid)) >> DTC P0602: Powertrain Control Module (Pcm) Programming Error

DTC P0602: Powertrain Control Module (Pcm) Programming Error

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0602 - POWERTRAIN CONTROL MODULE (PCM) PROGRAMMING ERROR

Description:  This DTC indicates a programming error within the vehicle identification (VID) block.
Possible Causes: 
  • VID data corrupted by the scan tool during VID reprogramming
Diagnostic Aids:  Program the VID block. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Making Changes to the VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table.